MacBook Trackpad Not Clicking Or Working – 7 Ways How To Fix It

I’ve been using a MacBook Pro for a few years now and it is one of the best pieces of technology I’ve ever used. However, some days it will be randomly not click on the trackpad. In fact, it’s not just random. It happens at least a few times a week. There are a few things that I’ve tried to fix it but it just keeps happening. Here’s a list of what I’ve done so far. I’ve tried to reboot it, I’ve tried to reset it, I’ve tried to put it in DFU mode, I’ve tried to reinstall the trackpad driver, and I’ve even put a new trackpad in place only to have the problem continue. Sometimes you just have to

The Apple trackpad is one of the most used and most important features on a Mac, and it’s a problem when it doesn’t work properly.

MacBook Trackpad Not Clicking Or Working – 7 Ways How To Fix It

Any MacBook would be incomplete without a trackpad. On your computer, you can use the built-in mouse to click, zoom in and out, and do a variety of other tasks. But what if the trackpad on your MacBook isn’t working? You can try a few different things, and with any luck, one of them will work.

Remember that just because the MacBook trackpad isn’t clicking doesn’t indicate it’s a hardware issue. It could be as easy as a software flaw, which you can fix in a matter of seconds. Let’s get to the potential solutions without further ado.

How to fix a non-clicking Macbook trackpad

Dealing with a Macbook that has a broken trackpad is anything but enjoyable. However, as previously stated, there are a number of things you can try, all of which are really straightforward. Let’s get this party started.

See also  The Gallery: Call of the Starseed – Review

1) Make use of the printer paper

The use of printing paper, which you must position around the trackpad by gliding it in, is one of the methods that proved to be simple but extremely successful. Next, heat the trackpad area using a heat gun or a blow drier. After that, wait a minute before pressing down on the trackpad with some effort. You can do it with your hands, but make sure the pressure is uniformly distributed and gentle. The trackpad should now be able to click and function normally.

2) Install the latest software

Next, see if a new version of the software is available. You can do so by selecting “About this Mac” from the menubar by clicking on the Apple logo. Select “System Preferences” from the drop-down menu. Then select Software Update from the drop-down menu. If a new software version is available, install it.

3) Shut down and restart your MacBook


As previously stated, the problem could be caused by a minor software bug. Simply restart your MacBook, and then try using the trackpad once the system is up and running again.

4) Clear the trackpad’s memory

Resetting the trackpad may appear difficult, but it is actually rather simple and takes only a few minutes of your time. Here’s what you should do:

  • In the menu bar, click the Apple logo and then About this Mac.
  • Select System Preferences after that.
  • Trackpad should be selected.
  • The phrase “tap to click” should not be thickened.


  • Check the box next to “Scroll direction: Natural.”

5) Disable the Force Click feature

The force click and tap to click are the two interaction modes available on every MacBook trackpad. Many individuals tap rather than click, and if you do the same, you may run into problems. Here’s how to turn off force clicks:

  • In the menu bar, click the Apple logo.
  • To learn more about this Mac, go to About This Mac.
  • Select System Preferences after that.
  • Trackpad should be selected.
  • “Force Click” should be turned off.
See also  How to Import MBOX to Thunderbird Manually Learn Here

6) Clear the NVRAM

Resetting the NVRAM is one of the techniques to troubleshoot a misbehaving Mac (trackpad included). Don’t be concerned. It’s not difficult at all. Here’s what you should do:

  • Turn your computer off.
  • Please pause for a moment.
  • Activate the power switch.
  • When the computer screen comes up, simultaneously press and hold command, options, R, and P.
  • Hold the keys down for around 20 seconds, or until you see the Apple logo twice.

7) Restart the SMC

Resetting the SMC (system management controller) can solve a variety of problems, and it’s a good option if nothing else seems to be working. The steps are as follows:

If you have a MacBook from 2017 or earlier, follow these steps:

  • Next, simultaneously press and hold the shift, control, and option buttons.
  • Press and hold the power key while holding the buttons.
  • Hold all of the buttons for ten seconds before releasing them.
  • Finally, turn on your MacBook by pressing the power button.

If you have a MacBook from 2018 or later, follow these steps:

  • Shut down the MacBook.
  • It was unplugged from the power source.
  • Please wait 10 to 20 seconds before plugging it in again.
  • Wait 5–10 seconds before pressing the power button to turn your MacBook on.

If none of these solutions work, take your MacBook to an Apple Store.

You might also be interested in: How To Fix A MacBook Pro Stuck On The Loading Screen

Macbook trackpad not working is a common issue, and mostly because of how sensitive our touchpad is. But, why is it not working? It can be due to many reasons. We will be discussing some of the effects that you can expect when your Macbook trackpad stops working, and the troubleshooting tips you can use to fix it.. Read more about macbook pro trackpad hard to click and let us know what you think.

See also  Puzzle Bobble VR – Review

Frequently Asked Questions

How do I fix my Mac trackpad not clicking?

The trackpad on your Mac is not broken, its just the way that Apple has set up their operating system. To fix this issue, you can either use a mouse or press the spacebar to click.

How do you fix an unresponsive trackpad on a MacBook Pro?

If your trackpad is unresponsive, the first step to fixing this issue is to ensure that it is not a hardware issue. This can be done by plugging in a different USB device and seeing if the trackpad works with that device. If the trackpad still does not work, you may need to replace the entire trackpad or motherboard.

Why is my Mac trackpad not working?

It is possible that your trackpad has been disabled by the operating system. To check this, go to System Preferences > Trackpad and click on Show All Devices. If you see a device listed there, it means that your Mac has not disabled it.

What do you think?


Written by Vaibhav Sharda